What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 03:32

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is 'the assistant's answer'
At least they know the answer if they wanted it.
Barnstars:
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Forget drones, Amazon has new robots that could replace humans - TheStreet
What does a fuse do?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Nintendo Switch 2 sales shatters records, most-sold console in 24-hour period - TweakTown
but I think this circuit , shows a few more pieces.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Who are the archers in Genesis 49:23?
2024–10–16 [ OO OLAOYE OYEBODE ]
Edit 2024–10.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Alex, C. Viper, Sagat and Ingrid announced for Street Fighter 6 Season 3 - EventHubs
Here is a simplified AC power diagram.
The other is “what does a “fuse” do?”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
so, what happens?
The bolt then partially travels down the line to your home.
How do you feel about the impending end of what Donald Trump calls "the Green New scam"?
He then describes the function of a fuse.
It seems Mohan does not understand the difference between a comment and an Answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Physicists observe a new form of magnetism for the first time - Phys.org
Upvotes:
For this case there are devices called Metal oxide varistors (MOV).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What do porn stars do when they get old?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
There are three different concepts here that are getting confused.
But… the neutral is now “floating” because of the 1 ohm resistance.
5 Things to Know Before the Stock Market Opens - Investopedia
A circuit breaker is similar, but is resettable.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
eight
What's the most valuable lesson you've learned in life, and how has it impacted your journey so far?
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
First Sentence:
Because the load is inductive, the current lags the voltage.(by a bit).
He then describes Rainy Season and Lightning.
These are simplified answers to the original question, and does not change anything I wrote above.
It also is a device that limits the change in current flow.
This is where the MOV conducts again, and dissipated the energy.
These devices are installed between the “hot” and “neutral” and protective ground.
In schematic diagrams this is the symbol for a fuse:
This one hit behind the barn.
There are two important concepts here.
[image of Common-mode choke]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
He then asserts :
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
what exactly is a ‘surge’ protector?
So, the voltage could go up to 500 volts, and the fuse will not open up.
(Dc diagram shown, AC is similar).
2024–10–14 [Omar Gharbi Omar Gharbi ]
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
One is “what exactly is in a ‘surge protector’ ? ”
But it can get overloaded, and no longer works.
the problem then depends on "how fast does the fuse operate?".
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The MOV will conduct when the voltage exceeds 50% of line voltage.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–10[John johnson John Johnson ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[old diagram got deleted by accident]
What is lightning?
The third is lightning and “how it gets conducted into a home.”
nine
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
A fuse is a non-resetable over current circuit protector.
One